(805) 744-2879CONTACT US

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

SALCA-MLC-2000 - Line Cutter Zinc - 2" Shaft MICRO-3/4" THICK(Patent Pending)

Be the first to review this product

Quick Overview

SALCA-MLC-2000 - Line Cutter Zinc - 2" Shaft MICRO-3/4" THICK (Patent Pending)
  • MICRO - Thinner Version

  • The Sacrificial Anode Line Cutter Assembly “SALCA” is an alternative to conventional anodes, combining the anode with a line-cutting blade.
  • The “SALCA” is an affordable alternative to the high cost of purchasing, repairing, replacing, conventional Line Cutters.
  • The “SALCA” is used on areas of vessel propeller shafts, where entanglement is likely.
  • Easy size verification inside and outside.
  • Easy installation-deep slotted stainless steel machine screws for maximum torque.
  • Stainless steel allen cap screws available upon request.
  • Innovative O-rings keep screws from falling out.
  • Individually boxed with foam insert for safety.
  • Availability: In stock

    • Buy 3 for $72.58 each and save 10%


    SALCA-MLC-2000 - Line Cutter Zinc - 2" Shaft MICRO-3/4" THICK(Patent Pending)

  • The Sacrificial Anode Line Cutter Assembly (SALCA) helps you protect your boat vessel from corrosion and propeller entanglement and provides you with a more convenient and economical alternative to conventionally used underwater line cutters.
  • The product combines both the benefits of an anode providing cathodic protection and a line cutter which keeps the propeller away from pollutants and sea weeds. The trapped threads in the anode allow for easy installation and the lock washers fights away loosening under vibration. To ensure maximum protection, the product conforms to Mil Spec MIL-A-18001.
  • You do not need to rely on professional installers to mount this assembly. You can easily replace the entire assembly once the sacrificial anode has reduced in size and reached the end of its service life. It is composed of two precisely sized halves that fasten around the shaft for best anodic protection and to eliminate the risk of spinning under pressure.

  • The Existing Problem

  • Traditional line cutters are expensive, which deters most boaters from investing in a useful product.
  • Line cutters can corrode if not maintained.
  • Many permanent line cutter blades need removing and sharpening.
  • Some other line cutters have to be specially fitted out of the water, at additional costs.
  • Certain vessel designs have limited shaft space allowing only an anode or line cutter to be installed, as there is not enough room for both.... SALCA solves this problem!

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

    1. Be the first to review this product

    Write Your Own Review